|
Thursday, 8 November 2012 |
9.00-10.30 | Parallel sessions |
Room 5-6
| Energy management and saving, chemical engineering
and conversion, surface modification |
Chair | M. Rohleder (Kassel/DE) |
9.00
| Invited lecture
Gas permeation properties of microporous amorphous silica-based
ceramic membranes
Y. Iwamoto (Showa-ku/JP) |
9.30
| Novel PCM /metal foam structures for thermal capture and storage
A. R. Kennedy, R. Njoku, M. Hall, P. Langston (Nottingham/GB) |
9.50
| Application of ceramic cellular solids in energy absorption, conservation
and generation
R. Johnson, G. Padmanabham (Hyderabad/IN) |
10.10
| Metal foam heat exchangers
T. Coyle, S. Chandra, J. Mostaghimi (Toronto/CA)
Metal foam core sandwich structures
T. Coyle, F. Tarasi, J. Mostaghimi, S. Chandra (Toronto/CA) |
Room 4 | Manufacturing |
Chair | J. Adler (Dresden/DE) |
9.00
| Keynote lecture
Nano-strategies applied to the production of cellular polymers with
improved cellular structure and properties
R. Perez, J. Pinto, J. Escudero, A. Lopez-Gil, S. Estravis,
C. Saiz-Arroyo (Valladolid/ES) |
9.50
| Different steel lattice structures manufactured by selective laser melting
L. Löber, S. Scudino, U. Kuehn, J. Eckert (Dresden/DE) |
10.10
| Aerogel filled metals: A syntactic cellular material
L. Ratke, S. Steinbach, A. Orth (Köln/DE) |
Room 3 | Modelling / Simulation |
Chair | C. Körner (Erlangen/DE) |
9.00
| Modelling the local strut thickness of open foams based on
3D image data
A. Liebscher, C. Redenbach (Kaiserslautern/DE) |
9.20
| Comparing results from numerical homogenization to experimental data
for closed-cell foams
N.-C. Fahlbusch, W. Becker, G. Geertz, V. A. Kolupaev (Darmstadt/DE) |
9.40
| A nonlinear constitutive model for lattice materials
A. Vigliotti, D. Pasini (Montreal/GB), V. Deshpande (Cambridge/GB) |
10.00-10.20
| Laguerre tessellations: Fitting a model to rigid closed-cell
polymer foams
I. Vecchio, K. Schladitz, C. Redenbach (Kaiserslautern/DE) |
10.30 - 11.00 | Break |
11.00-12.20 | Parallel sessions |
Room 5-6
| Energy management and saving, chemical engineering
and conversion, surface modification |
Chair | Y. Iwamoto (Nagoya/JP) |
11.00
| High temperature insulation materials manufactured via continuous direct
foaming
F. Luthardt, J. Adler, A. Morgenstern (Dresden/DE) |
11.20
| Catalytically functionalized ceramic foams for exhaust gas treatment
J. Adler (Dresden/DE), T. Krech (Jena/DE), D. Boettge, G. Standke
(Dresden/DE), R. Krippendorf, P. Scholz (Jena/DE) |
11.40
| Trends and potential of advanced insulating foams
M.-K. Sommer, P. Gutmann, R. Hingmann (Ludwigshafen/DE) |
12.00
| Application of open-porous aluminium fibre structures in fast heat
storage devices utilising phase-change materials
O. Andersen, J. Meinert, T. Studnitzky, G. Stephani, B. Kieback (Dresden/DE) |
Room 4 | Manufacturing |
Chair | R. Perez (Valladolid/ES) |
11.00
| Manufacturing of Al foams by powder sintering and investigation of their
mechanical response by experimental and computational methods
F. Stergioudi (Thessaloniki/GR), A. E. Markaki (Cambridge/GB), D. Tsipas,
A. Tsouknidas, N. Michailidis (Thessaloniki/GR) |
11.20
| And if all bubbles were equal? Polymer foams with well-controlled
morphologies using Lab-on-a-chip technologies
A. Testouri, M. Ranft, C. Honorez, N. Kaabeche (Paris/FR), D. Hajnal,
J. Ferbitz, D. Freidank, F. Heilmann, P. Müller (Ludwigshafen/DE),
W. Drenckhan (Paris/FR) |
11.40
| Investigation of the suitability of PA12-models made in the
rapid prototyping process for the production of graded
topology-optimized sponge structures in the investment casting
E. Ivanova, A. Bühring-Polaczek (Aachen/DE) |
12.00
| Foaming of aluminium combining casting and foamable precursors
J. Harnuskova, F. Simancik, R. Florek, M. Nosko (Bratislava/SK),
F. García-Moreno (Berlin/DE) |
Room 3 | Modelling / Simulation |
Chair | J. Hohe (Freiburg/DE) |
11.00
| Modelling foam structures using implicit functions
J. Storm, M. Abendroth, T. Liedke, T. Sieber, M. Emmel, C. Voigt,
U. Ballaschk, M. Kuna (Freiberg/DE) |
11.20
| Cellular ceramics effective properties computation: a finite elements
approach
A. Ortona, C. D'Angelo (Manno/CH) |
11.40
| A light weight design approach for aesthetic consumer goods
using biomimetic structures
T. Ziegler, R. Jäger (Freiberg/CH) |
12.00
| Computational modelling of lotus-type porous iron
M. Vesenjak, A. Kovačič, M. Borovinšek, Z. Ren (Maribor/SI),
H. Nakajima (Osaka/JP) |
12.20 - 13.20 | Break |
13.20-15.30 | Parallel sessions |
Room 5-6
| Energy management and saving, chemical engineering
and conversion, surface modification |
Chair | M. Scheffler (Magdeburg/DE) |
13.20
| Novel-type heat exchangers with cellular ceramics as filling material
A. Fedorova (Magdeburg/DE), S. Grunig (Leipzig/DE), G. Motz
(Bayreuth/DE), J. Nitzsche (Leipzig/DE), A. Prette (Leipzig, Bayreuth/DE),
S. Rannabauer (Magdeburg/DE), M. Werschy (Leipzig/DE), H. Werbig,
M. Wiersig (Striegistal/DE), M. Scheffler (Magdeburg/DE) |
13.40
| Anodizing of open-cell aluminium foams
D. Nestler, G. Alisch, H. Steger, B. Kloß, T. Lampke, B.
Wielage (Chemnitz/DE) |
14.00
| Systematic thermal and flow characterisation of
open cellular structures
J. Meinert, S. Synowzik, W. Menzel, P. Quadbeck, G. Stephani,
B. Kieback (Dresden/DE) |
14.20
| High-temperature resistant open cell structures for catalytic converter
carriers
P. Quadbeck, K. Kümmel, G. Standke, J. Adler (Dresden/DE), R.
Wegner (Drochow/DE), G. Stephani, B. Kieback (Dresden/DE) |
14.40
| Preperation and applications of nano-structured micro-porous cellular
materials in agriculture, biology and chemical and energy conversion
processes
G. Akay, A. El Nagger, T. Ndlovu, Z. Zheng (Newcastle upon Tyne/CN) |
15.00
| Dynamic behaviour of electrodeposited nickel thin-walled hollow sphere foams
P. Li (Nanyang/SG), N. Petrinic, C. R. Siviour (Oxford/GB) |
Room 4 | Manufacturing |
Chair | T. Schaedler (Malibu, CA/US) |
13.20
| Invited lecture
Titanium with designed, elongated pores: From aerospace to biomedical
implants
D. C. Dunand (Evanston, IL/US) |
13.50
| Recent progress in innovative reinforced particle foams
F. Rapp (Pfinztal - Berghausen/DE), W. Böhme (Freiburg/DE),
J. Weise (Bremen/DE), J. Diemert, F. Henning (Pfinztal - Berghausen/DE) |
14.10
| Metallic hollow sphere structures - status and outlook
H. Göhler, U. Jehring, K. Kümmel, J. Meinert, P. Quadbeck, G. Stephani,
B. Kieback, W. Hungerbach, J. Hübelt (Dresden/DE) |
14.30
| Influence of some process parameters on the strength and
microstructure of the intermetallic joint at the interface
aluminium foam/steel substrate
M. Monno (Milano/IT), V. Mussi, D. Negri (Piacenza/IT) |
14.50
| Fabrication of Ni-based superalloy open-cell foam using conventional
production methods
E. Amsterdam (Marknesse/NL), H. A. Verduyn, J. Leijenhorst
(Oud-Beijerland/NL), R. Jongbloed (Maastricht/NL) |
15.10
| Mechanism of liquid aluminum foam stabilization by short carbon fibers
Z. Cao, G. Yao (Shenyang/CN), Y. Feng, G. Han (Xuzhou/CN)
|
Room 3
| Physical, chemical, mechanical, thermal and optical properties |
Chair | J. Binner (Loughborough/GB) |
13.20
| Invited lecture
Tailoring properties of polymer foams
V. Altstädt (Bayreuth/DE) |
13.50
| Synthesis and characterization of highly porous cellulose aerogels for
textiles applications
I. Kayacan Karadagli, L. Ratke, B. Milow (Köln/DE), B. Schulz, G. Seide,
T. Gries (Aachen/DE) |
14.10
| Processing and non-destructive characterisation of porous silicon carbide
preforms for metal/ceramic composite fabrication
S. Roy, K. G. Schell, E. C. Bucharsky, P. Hettich, S. Dietrich,
K. A. Weidenmann, A. Wanner, M. J. Hoffmann (Karlsruhe/DE) |
14.30
| Measurement and Numerical Evaluation of Effective Thermal Conductivity
of FeCrAl-alloy open cell metal foams
V. Skibina, M. Mendes , S. Ray, R. Wulf (Freiberg/DE), A. Al-Zoubi
(Dresden/DE), D. Trimis, U. Gross (Freiberg/DE) |
14.50
| Aluminum foam and polymer hybrid components - mechanical properties
and their application fields
D. Schmidt, G. Lange (Ilmenau/DE) |
15.10
| Preparation and capillary pumping performance of open-cell copper foams
J. Ru, B. Kong, T. Fan (Shanghai/DE) |
15.30-16.00 | Break |
16.00-18.00 | Parallel sessions |
Room 5-6 | Automotive, aerospace and transportation |
Chair | H. Nakajima (Osaka/JP) |
16.00
| Invited lecture
Open porous metal foams for innovative applications
S. Kim, J. S. Bae, M. Jang, M. H. Park (KR), R. Poss, A. Tillmann (Munich/DE) |
16.30
| Measuring and simulating acoustic absorption of cellular metals
B. Hinze, J. Rösler (Braunschweig/DE) |
16.50
| Cellular composites - manufacturing, mechanical properties and
applications in lightweight structures
S. Diel, O. Huber (Landshut/DE) |
17.10
| Polyurethane flexible cellular foam synergized fire resisting process
Z. Ahmadi, A. Gharabaghi (Teheran/IR) |
17.30
| Function integrated fibre-reinforced polyurethane composites with
cellular matrix for intelligent lightweight structures
S. Geller, W. Hufenbach, M. Gude (Dresden/DE) |
Room 4 | Manufacturing |
Chair | T. Fey (Erlangen/DE) |
16.00
| 3D-printing as manufacturing method for cellular materials
T. Studnitzky, M. Jurisch, A. Strauß (Dresden/DE), J. Bauer (Hillscheid/DE) |
16.20
| A new method for making closed cell aluminum foams without stabilizer
particles
M. Heidari, N. Ehsani, H. R. Baharvandi, B. Torkjazi (Teheran/IR) |
16.40-17.00
| Cellular ceramics from demixing processes: Interactions between
substrates and preceramic polymer coating systems
A. Laskowsky, P. Thiem, S. Cung (Magdeburg/DE), M. Woiton, M. Heyder,
E. Stern (Erlangen/DE), M. Scheffler (Magdeburg/DE) |
Room 3 | Physical, chemical, mechanical, thermal and optical properties |
Chair | V. Altstädt (Bayreuth/DE) |
16.00
| Particulate reinforced cellular carbon - MgO composites: Approaches of
numerical-experimental analysis of thermal shock damage
G. Falk, W. Da Silveira (Saarbrücken/DE) |
16.20
| Preparation of porous polymeric material-reinforced xerogelas a
high performance thermal insulator with high mechanical property
M. Ohshima, K. Hosokawa, H. Shikuma, S. Nagamine (Kyoto/JP) |
16.40
| Behaviour of CFRC/Al foam composite sandwich beams in three-point
bending
M. Vcelka, J. Dunn, D. Ruan, Y. Durandet, C. Berndt (Melbourne/AU) |
17.00
| Zirconia phase transformations in MMC composed of CrMnNi-TRIP-steel
and ZrO2-ceramic
C. Weigelt, C. G. Aneziris, H. Berek (Freiberg/DE) |
17.20
| Mechanical and optical characterization of carbon bonded alumina using
the Small Punch Test
S. Soltysiak, S. Dudczig, M. Abendroth, M. Kuna (Freiberg/DE) |
| |